[vserver] multi-nic

About this list Date view Thread view Subject view Author view Attachment view

From: Jukka Laaksola (jukka.laaksola_at_netland.fi)
Date: Thu Jul 18 2002 - 05:14:59 EDT

Hello!

I have a little problem with vservers multi-IP configuration. I read the
manual and didn't found any help.

I have two ethernet cards on my main host, eth0 and eth1.

eth0: network 10.10.10.0/24
eth1: network 192.168.0.0/24

With vserver-0.17 I got one ip, 10.10.10.40, worked well in the virtual
host. Now with vserver-0.18's multi-ip support I thought I can get
access to the both of my networks.

If I set IPROOT="192.0.168.11 10.10.10.40" in my virtual host's config.
It tries to set both ips as aliases for eth0. My IPROOTDEV=eth0.

I also tried put IPROOTDEV="eth0 eth1", but that wasn't work either.

So is it somehow possible to use two nic in one virtual host?
10.10.10.40 as eth0:v1 and 192.168.0.11 as eth1:v1.
If it isn't possible, is it in the todo list?

Very happy vserver user Jukka 

-- 
Jukka Laaksola
Netland Oy
About this list Date view Thread view Subject view Author view Attachment view

This archive was generated by hypermail 2.1.4 : Mon Aug 19 2002 - 12:01:01 EDT